Phone # 1- 800-678-3313    Fax: 1-616-241-1506     Store & Phone Hours: M-F, 8 - 4:30 EST                                                                        Established 1969
 

 

 
  Home  |  Products  |  Services  |  Custom Tooling  |  Customer Service  |  Help & Info  |  About Us
- Back
- Solid Carbide Bits
- CT Straight Flute Bits
- Slotting Bits
- T-Slotting Bits
- Jointing Bits
- CT Chamfer & Bevel
- CT Rounding Bits
- Grooving Router Bits
- CT Pattern Groovers
- Tongue & Groove Bits
- Bead or V Paneling Bits
- Window Router Bits
- Profiling Router Bits
- Stile & Rail Router Bits
- Raised Panel Router Bits

We Accept:

  

Carbide Tipped Roundover and Beading Router Bits
 

Roundover Router Bits

Beading Router Bits

Coving Router Bits

Bullnose Router Bits

Adjustable Double Easing Router Bits

Variable Double Easing Router Bit
 

Carbide Tipped Roundover Router Bits

Standard Carbide Tipped Radius Router Bits.

 The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.
 
R ØD B Ød L Part #
1/16 5/8 5/16 1/4 1-3/4 49492
1/16 5/8 5/16 1/2 2-1/4 49494
1/8 3/4 3/8 1/4 2 49496
1/8 3/4 3/8 1/2 2-5/16 46498
5/32 3/4 3/8 1/4 2 49499
5/32 3/4 3/8 1/2 2-1/4 49501
3/16 7/8 1/2 1/4 2 49500
3/16 7/8 1/2 1/2 2-7/16 49502
1/4 1 1/2 1/4 2 49504
1/4 1 1/2 1/2 2-7/16 49506
5/16 1-1/8 1/2 1/4 2-1/16 49508
5/16 1-1/8 1/2 1/2 2-7/16 49510
3/8 1-1/4 5/8 1/4 2-3/16 49512
3/8 1-1/4 5/8 1/2 2-9/16 49514
7/16 1-3/8 5/8 1/2 2-9/16 49515
1/2 1-1/2 3/4 1/4 2-1/4 49516
1/2 1-1/2 3/4 1/2 2-5/8 49518
9/16 1-5/8 3/4 1/2 2-5/8 49517
5/8 1-3/4 7/8 1/2 2-3/4 49519
3/4 2 1 1/2 2-7/8 49520
7/8 2-1/4 1-1/4 1/2 3-1/16 49521
1 2-1/2 1-1/4 1/2 3-3/16 49522
1-1/8 2-3/4 1-3/8 1/2 3-1/4 49523
1-1/4 3 1-1/2 1/2 3-1/4 49524
1-3/8 3-1/4 1-5/8 1/2 3-1/2 49525
1-1/2 3-1/2 1-3/4 1/2 3-5/8 49526

Dont see what you are looking for click here.
 

Carbide Tipped Beading Router Bits

Standard Carbide Tipped Radius Router Bits.

 Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit. The width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. A beading bit can be transformed into a corner rounding bit by changing the bearing (and vice versa).

 
R ØD B Ød L Part #
1/16 5/8 5/16 1/4 1-3/4 49592
1/16 5/8 5/16 1/2 2-1/4 49594
1/8 3/4 3/8 1/4 2 49596
1/8 3/4 3/8 1/2 2-5/16 49598
5/32 3/4 3/8 1/4 2 49599
5/32 3/4 3/8 1/2 2-1/4 49601
3/16 7/8 1/2 1/4 2 49600
3/16 7/8 1/2 1/2 2-7/16 49602
1/4 1 1/2 1/4 2 49604
1/4 1 1/2 1/2 2-7/16 49606
5/16 1-1/8 1/2 1/4 2-1/16 49608
5/16 1-1/8 1/2 1/2 2-7/16 49610
3/8 1-1/4 5/8 1/4 2-3/16 49612
3/8 1-1/4 5/8 1/2 2-9/16 49614
7/16 1-3/8 5/8 1/2 2-9/16 49615
1/2 1-1/2 3/4 1/4 2-1/4 49616
1/2 1-1/2 3/4 1/2 2-5/8 49618
9/16 1-5/8 3/4 1/2 2-5/8 49617
5/8 1-3/4 7/8 1/2 2-3/4 49619
3/4 2 1 1/2 2-7/8 49620
7/8 2-1/4 1-1/4 1/2 3-1/16 49621
1 2-1/2 1-1/4 1/2 3-3/16 49622

Dont see what you are looking for click here.
 

Carbide Tipped Coving Router Bits

Standard Carbide Tipped Radius Router Bits.

 The covetto form—produced by the cove bit—is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove as well to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. The other half is the corner-round. Use in handheld or table-mounted routers. Large-diameter tools must be run at reduced speed. For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish and prolong tool life.
 
R ØD B Ød L Part #
1/16 1/2 1/2 1/4 2 49092
1/8 5/8 1/2 1/4 2 49094
3/16 3/4 9/16 1/4 2 49100
3/16 3/4 9/16 1/2 2-3/8 49102
1/4 7/8 9/16 1/4 2 49104
1/4 7/8 9/16 1/2 2-3/8 49106
5/16 1 9/16 1/4 2-1/8 49108
5/16 1 9/16 1/2 2-3/8 49110
3/8 1-1/8 9/16 1/4 2 49112
3/8 1-1/8 9/16 1/2 2-3/8 49114
7/16 1-1/4 5/8 1/2 2-1/2 49115
1/2 1-3/8 3/4 1/4 2-1/4 49116
1/2 1-3/8 3/4 1/2 2-1/2 49118
5/8 1-5/8 11/16 1/2 2-1/2 49119
3/4 2 1 1/2 2-7/8 49120
7/8 2-1/4 1-1/4 1/2 3-1/8 * 49121
1 2-1/2 1-1/4 1/2 3 * 49122
* Not guaranteed due to extreme diameter and radius.

Dont see what you are looking for click here.
 

Carbide Tipped Bullnose Router Bits

Standard Carbide Tipped Radius Router Bits.

 Shape the full edge of a work piece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. The “nose diameter” (T) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Must be used with an edge guide on handheld routers or the fence on a router table.
 
R T ØD B Ød L Part #
5/64 5/32 17/32 1/2 1/4 1-3/4 51540
7/64 7/32 19/32 1/2 1/4 1-3/4 51542
9/64 19/64 21/32 3/4 1/4 1-7/8 51544
13/64 27/64 7/8 3/4 1/4 2 51546
5/64 5/32 17/32 1/2 1/2 2 51550
7/64 7/32 19/32 1/2 1/2 2 51552
9/64 9/32 21/32 3/4 1/2 2-1/4 51554
13/64 27/64 7/8 3/4 1/2 2-1/4 51556
17/64 35/64 1-1/32 1 1/2 2-1/2 51558
5/16 5/8 1-1/8 1 1/2 2-1/2 51559
3/8 3/4 1-5/16 1-1/4 1/2 2-3/4 51560
1/2 1 1-11/16 1-9/16 1/2 3-1/16 51562
5/8 1-1/4 2 2 1/2 3-1/2 51564
3/4 1-1/2 2-3/8 2 1/2 3-1/2 † 51566
5/8 1-1/4 2 2 1/2 3-1/2 51564-CNC
3/4 1-1/2 2-3/8 2 1/2 3-1/2 53566-CNC
† 3-Flute Tool all others are 2-flute.
Tools marked with -CNC are for use on a CNC machine only.

Dont see what you are looking for click here.
 

Carbide Tipped Double Easing Adjustable Router Bits

Standard Carbide Tipped Radius Router Bits.

 Roundover both the top and bottom edges in just one pass with this assembly. Interchangeable spacers alter cutter spacing to accommodate different stock thicknesses up to 1-1/4". The assembly includes the arbor, a pair of multi-angle cutters, pilot bearing, spacers, and shims. Replacement parts are available separately. For best results use in a router table!
 
Radius ØD Capacity Cutter Length Shank OAL Part #
3/16 1-1/2 *3/4 to 1-1/4 19/64 1/2 3-5/8 49750
1/4 1-19/32 *13/16 to 1-11/32 3/8 1/2 3-5/8 49755
3/8 1-55/64 *1 to 1-1/4 33/64 1/2 3-5/8 49760
* Minimum thickness with ball bearing. Without bearing, deduct approx.
5/16" from the smaller dimension.
 

Carbide Tipped Double Easing Variable Radius Adjustable Router Bits

Standard Carbide Tipped Radius Router Bits.

 This assembly has multiple-radii cutters that enable you to roundover both top and bottom edges in just one pass, using either of two radii. Switch the positions of the cutters to change the cut radius. Interchangeable spacers alter cutter spacing to accommodate different stock thicknesses from 3/8" up to 1-9/16". The assembly includes the arbor, a pair of multi-angle cutters, pilot bearing, spacers, and shims. Replacement parts are available separately. For best results use in a router table!
 
Radius 1 Radius 2 ØD Cutter Length Shank OAL Part #
1/4" 3/16 1-3/8 9/16 1/2 4-1/4 49770
 
    Capacity
    Stock Thickness
    Min. Max.
R1=1/4" With Ball Bearing 13/16 1-9/16
R2=3/16" With Ball Bearing 11/16 1-7/16
R1=1/4" Without Ball Bearing 1/2 1-9/16
R2=3/16" Without Ball Bearing 3/8 1-7/16
 

Need to cut a round groove in your product?
 

Check out the

Corebox

bits here.
 

Don't see the size you are looking for?

Check out our

Custom Tooling

request pages.
 

© 2008 Carbide Specialties Incorporated

Report problems or suggestions to our Webmaster.
Carbide Tipped Rounding Router Bits