Dado Sets

Freud® Dial-A-Width Stacked Dado Sets

Freud® Super Dado Sets

Freud® Safety Dado Sets

Freud® Pro Dado Sets

FS Tool Standard Dado Sets

FS Tool Safety (Anti-Kickback) Dado Sets

FS Tool Fine Dado Sets

The Dial-A-Width Dado set performs like a stacked dado, but we have replaced the shims with a patented dial system and with our exclusive Dial hub, ensures accurate adjustments. Each “click” of the dial adjusts the blade by .004". The Dial-A-Width dado set is easy to use, and very precise. For the serious woodworker, there’s nothing better.

Adjusts in .004" increments.
Maximum 29/32" cut width.
Adjusts easily to right or left operating machines.
Set includes 2 outside blades, 5 chippers, wrench and carrying case.
Does not need shims.
 

The SD500 Series of dado sets cuts everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom. The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today’s undersized plywood. This allows the cut width to be adjusted in 1/32" increments and doubles the number of slot widths available. A shim set is also included with the dado set for fine adjustments. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
 

Freud’s Safety Dado Sets provide the highest quality results while maintaining a superior level of safety. This stacked dado set with its razor sharp outside blades will produce grooves or rabbets which are flat-bottomed and virtually splinter-free in solid woods. Stacked dado sets are more precise than other styles and with the use of Freud’s Shim Set the kerf width can be adjusted by as little as .004" for the correct fit. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
 

Freud’s quality and craftsmanship in a stacked dado set, but at a wobble dado price! The negative hook angles make flat bottom grooves and virtually splinter-free cuts. It has two outside blades with five two wing chippers. This makes it ideal for underpowered saws because it requires less power to feed. All blades and chippers come with Freud’s antikickback design. This resharpenable set will produce grooves from 1/4" to 13/16" in 1/16" increments. This dado set comes with a shim set and carrying case as well as instructions on how to make basic dado sizes.
 

D E S I G N :

• Standard set consists of two outside saws blades 1/8" kerf, one 1/4" chipper, two 1/8" chippers and one 1/16" chipper
• Cutting material: TC
   

A P P L I C AT I O N :

• To cut grooves and dados in soft and hardwoods, plywood and veneered panels
• Groove widths adjustable from 1/4" to 13/16" maximum width in 1/16" increments. Wider grooves can be obtained by adding spare chippers
• On table saws, sliding table saws and single or double end tenoners

• Standard set consists of two outside saw blades 1/8" kerf, one 1/4"
  chipper, two 1/8" chippers and one 1/16" chipper
• “Anti-kickback” design reduces the risk of kick-back
• Cutting material: TC

A P P L I C AT I O N :

• To cut grooves and dados in soft and hardwoods, plywood and veneered panels
• Groove widths adjustable from 1/4" to 13/16" maximum width in 1/16"
  increments. Wider grooves can be obtained by adding spare chippers
• On table saws, sliding table saws and single or double end tenoners

• Standard set consists of two outside saw blades 1/8" kerf, one 1/4" chipper, two 1/8" chippers and one 1/16" chipper
• Cutting material: TC
• Hook angle: 0°
   

A P P L I C AT I O N :

• To cut grooves and dados in plastic laminated panels
• Groove widths adjustable from 1/4" to 13/16" maximum width in 1/16"
  increments. Wider grooves can be obtained by adding spare chippers
• On table saws, sliding table saws and single or double end tenoners