Solid
Carbide Dowel Drills
|
 |
|
|
|
Dowel Drills with Solid Carbide
Flutes, Brad Point
Dowel Drills with Solid Carbide
Flutes, Through Point
Solid
Carbide Twist Drills, Drill Point
Solid
Carbide Twist Drills, Brad Point
Adapters for
Solid Carbide Twist Drills
Bushings for
Solid Carbide Twist Drills
|
|
Dowel Drills with Solid Carbide
Flutes
Brad Point
with
10mm Shank |
|
 |
|
Technical |
|
Applications |
|
Solid
tungsten carbide flute
portion with a center point
and two cutting edges.
Two curved negatively ground
spurs.
Premium quality super
strength steel shank.
Parallel shank with a
machined flat for driving
and a length adjusting
screw. |
|
The solid
carbide flutes of these
tools are made from premium
quality micrograin carbide
for extended tool life and
superior cutting edge
quality.
Ideal for hardwoods and
difficult composites such as
particle board, MDF, and
veneer.
Great tools for high speed
boring machines.
Advanced point design
reduces drilling resistance
and increases production
speed. |
|
| |
57mm Overall Length
|
|
Cutting |
Flute |
Shank |
Right
Hand |
Left
Hand |
|
Diameter |
Length |
Length |
Tool # |
Tool # |
|
3 |
18 |
31 |
310.030.21 |
310.030.22 |
|
5/32” / 4 |
20 |
29 |
310.040.21 |
310.040.22 |
|
5 |
22 |
27 |
310.050.21 |
310.050.22 |
|
6 |
22 |
27 |
310.060.21 |
310.060.22 |
|
1/4” |
22 |
27 |
310.064.21 |
310.064.22 |
|
8 |
27 |
27 |
310.080.41 |
310.080.42 |
|
10 |
27 |
27 |
310.100.41 |
310.100.42 |
|
12 |
27 |
27 |
D45L12R |
D45L12L |
|
All dimensions are in
Millimeters (mm) unless
otherwise specified. |
|
| |
70mm Overall Length
|
|
Cutting |
Flute |
Shank |
Right
Hand |
Left
Hand |
|
Diameter |
Length |
Length |
Tool # |
Tool # |
|
3 |
18 |
43.5 |
311.030.21 |
311.030.22 |
|
5/32” / 4 |
27 |
34.5 |
311.040.21 |
311.040.22 |
|
5 |
30 |
31.5 |
311.050.21 |
311.050.22 |
|
6 |
30 |
31.5 |
311.060.21 |
311.060.22 |
|
1/4” |
30 |
31.5 |
311.064.21 |
311.064.22 |
|
8 |
35 |
30 |
311.080.41 |
311.080.42 |
|
10 |
35 |
30 |
311.100.41 |
311.100.42 |
|
12 |
35 |
27 |
D45M12R |
D45M12L |
|
All dimensions are in
Millimeters (mm) unless
otherwise specified. |
|
| |
|
Dowel Drills with Solid Carbide
Flutes
Through
Point
with
10mm Shank |
 |
|
Technical |
|
Applications |
|
Solid
tungsten carbide flute
portion with a 60º
V-point and two cutting
edges.
Premium quality super
strength steel shank.
Parallel shank with a
machined flat for driving
and a length adjusting
screw. |
|
The solid
carbide flutes of these
tools are made from premium
quality micrograin carbide
for extended tool life and
superior cutting edge
quality.
Ideal for hardwoods and
difficult composites such as
particle board, MDF, and
veneer.
Great tools for high speed
boring machines.
Advanced point design
reduces drilling resistance
and increases production
speed. |
|
| |
70mm Overall Length
|
|
Cutting |
Flute |
Shank |
Right
Hand |
Left
Hand |
|
Diameter |
Length |
Length |
Tool # |
Tool # |
|
5/32” / 4 |
27 |
34 |
314.040.21 |
314.040.22 |
|
5 |
30 |
31.5 |
314.050.21 |
314.050.22 |
|
6 |
35 |
27 |
D45Y06R |
D45Y06L |
|
8 |
35 |
26 |
314.080.41 |
314.080.42 |
|
All dimensions are in
Millimeters (mm) unless
otherwise specified. |
|
| |
|
Solid
Carbide Twist Drills, Drill Point
Shank Diameter
is same as cutting diameter. |
 |
|
Technical |
|
Applications |
|
Solid high
grade micrograin tungsten
carbide throughout.
120° V-point and two cutting
edges.
Used in adapters or bushings
sold below. |
|
The solid
carbide flutes of these
tools are made from premium
quality micrograin carbide
for extended tool life and
superior cutting edge
quality.
Ideal for hardwoods and
difficult composites such as
particle board, MDF, and
veneer.
Longer tool life over tipped
type dowel bits. |
|
| |
|
Cutting |
Flute |
O.A.L. |
Right
Hand |
Left
Hand |
|
Diameter |
Length |
|
Tool # |
Tool # |
|
2 |
25 |
49 |
363.020.11 |
363.020.12 |
|
2.4 |
25 |
55 |
295024R |
295024L |
|
2.5 |
27 |
57 |
363.025.11 |
363.025.12 |
|
2.8 |
25 |
55 |
295028R |
295028L |
|
3 |
27 |
55 |
363.030.11 |
363.030.12 |
|
1/8” |
27 |
52 |
363.032.11 |
363.032.12 |
|
3.5 |
27 |
52 |
363.035.11 |
363.035.12 |
|
5/32” / 4 |
27 |
55 |
363.040.11 |
363.040.12 |
|
4.5 |
28 |
58 |
363.045.11 |
363.045.12 |
|
5 |
28 |
62 |
363.050.11 |
363.050.12 |
|
All dimensions are in
Millimeters (mm) unless
otherwise specified. |
|
| |
|
Solid
Carbide Twist Drills, Brad Point
Shank Diameter
is same as cutting diameter. |
 |
|
Technical |
|
Applications |
|
Solid high
grade micrograin tungsten
carbide with a center point
and two cutting edges.
Two curved negatively ground
spurs.
Used in adapters or bushings
sold below. |
|
The solid
carbide flutes of these
tools are made from premium
quality micrograin carbide
for extended tool life and
superior cutting edge
quality.
Ideal for hardwoods and
difficult composites such as
particle board, MDF, and
veneer.
Longer tool life over tipped
type dowel bits. |
|
|
|
|
Cutting |
Flute |
O.A.L. |
Right
Hand |
Left
Hand |
|
Diameter |
Length |
|
Tool # |
Tool # |
|
3 |
27 |
53 |
29503BR |
29503BL |
|
1/8” |
27 |
53 |
295032BR |
295032BL |
|
3.5 |
27 |
53 |
295035BR |
295035BL |
|
5/32” / 4 |
27 |
53 |
29504BR |
29504BL |
|
4.5 |
27 |
53 |
295045BR |
295045BL |
|
5 |
27 |
53 |
29505BR |
29505BL |
|
All dimensions are in
Millimeters (mm) unless
otherwise specified. |
|
| |
|
Adapters for
Solid Carbide Twist Drills
10mm Diameter
x 20mm Length Shank |
|
|
| |
|
|
