|
Ground with a rippled
cutting edge.
Three flutes for very fast feed
rates.
High quality carbide for the best
cutting edges and longest tool life.
End geometry allows for good
plunging through most materials. |
|
Used for heavy and
fast feeds through dense materials
such as hardwoods and plywood.
Designed for use on CNC routers as a
first cut type tool to be followed
by a finishing tool.
This bit leaves a scalloped edge cut
on the material.
These bits are extremely quiet and
smooth cutting.
Upcut for good chip flow to improve
dust collection.
|
|
Ground with a rippled
cutting edge.
Three flutes for very fast feed
rates.
High quality carbide for the best
cutting edges and longest tool life.
End geometry does not allow for good
plunging through most materials. |
|
Used for heavy and
fast feeds through dense materials
such as hardwoods and plywood.
Designed for use on CNC routers as a
first cut type tool to be followed
by a finishing tool.
This bit leaves a scalloped edge cut
on the material.
These bits are extremely quiet and
smooth cutting.
Downcut to assist part holding
during heavy feeds. |
