Carbide Tipped Stile & Rail
Router Bits
|
 |
|
|
|
Stile & Rail Bits for Flat Panels
Stile & Rail Bit Sets (Full Cut)
Stile & Rail Bit Sets w/BBRC
Reversible Stile & Rail Bit Sets
One Piece Stile & Rail Bits
|
|
|
|
|
|
The perfect fix for undersized
plywood flat panel cabinet doors.
Building strong rattle-free flat
panel cabinets couldn't be any
simpler!
-
Designed to cut precise
grooves to provide
undersized plywood veneered
panels with a snug rattle
free fit.
-
Adjust the panel groove
width (3/16" to 9/32" for
1/4" plywood - 7/16" to
17/32" for 1/2" plywood).
-
Cut frame stock for 5/8"
through 1-1/4" in thickness.
-
Each set includes 2 pcs.
(1 for stile cuts & 1 for
rail cuts and shims).
-
Carbide- tipped for
longer cutting tool life.
|
|
D |
d |
C |
L |
Part # |
|
1 5/8 |
1/2" |
3/8 |
3 11/32 |
55433 |
|
1 5/8 |
1/2" |
3/8 |
3 11/32 |
55436 |
|
1 5/8 |
1/2" |
3/8 |
3 11/32 |
55437 |
|
1 5/8 |
1/2" |
3/8 |
3 11/32 |
55438 |
|
1 7/8 |
1/2" |
1/2 |
3 11/32 |
55439 |
|
1 7/8 |
1/2" |
1/2 |
3 11/32 |
55432 |
|
|
|
|
|
 |
|
2-Wing With Ball Bearing Guide
These types of sets utilizes two
different cutters that are 'coped'
to each other. Also included are
extra cutters for trimming and
rabbeting and spacers if you decide
to use the bearings similar to a
'reversible' set.
With trim cutters #55448 & #55450 -
use on 7/8" through 1" stock use.
For 5/8" through 7/8" stock,
substitute trim cutters with
spacers.
|
|
D |
B |
d |
L |
Part # |
|
1 5/8 |
1 1/16 |
1/2 |
3 5/16 |
55420 |
|
1 5/8 |
1 1/16 |
1/2 |
3 5/16 |
55430 |
|
1 5/8 |
1 1/16 |
1/2 |
3 5/16 |
55440 |
|
|
|
|
|
 |
|
2-Wing With Ball Bearing Guide 3/4"
Material
Our rail and stile sets give you two
complete bits, one for doing the
rail cuts, one for the stiles. Make
cabinet doors and all varieties of
frame-and-panel assemblies for
furniture and architectural
applications. The same three
profiles are available in either
configuration.
Bits in this set have profile and
groove or rabbet cutters and
ball-bearing guide mounted on a 1/2"
shank. Respacing of the components
should only be necessary – using the
provided shims – after the cutters
have been resharpened. Use in a
table-mounted router. Guide straight
cuts with the fence; use the pilot
bearing only for cuts on curved
rails or stiles.
|
|
D |
B |
d |
L |
Part # |
|
1 5/8 |
11/16 |
1/2 |
3 1/8 |
55421 |
|
1 5/8 |
11/16 |
1/2 |
3 1/8 |
55431 |
|
1 5/8 |
11/16 |
1/2 |
3 1/8 |
55441 |
|
|
|
|
|
 |
|
2-Wing With Ball Bearing Guide
Use one tool for both cuts by
reversing the assembly. Includes
shims that give perfect alignment
before and after sharpening. For
best results, the rail cut should be
done on a router table. With
complete instructions.
Note: Stile & Rail assemblies can be
used on 5/8" through 7/8" material.
Tongue & Groove can be used on 1/2"
through 3/4" material.
|
|
D |
B |
d |
L |
Part # |
|
1 5/8 |
11/16 |
1/2 |
3 |
55350 |
|
1 5/8 |
11/16 |
1/2 |
3 |
55370 |
|
1 5/8 |
11/16 |
1/2 |
3 |
55380 |
|
|
|
|
|
 |
These one piece stile & rail bits
are an easy and effective technique
for creating cabinet door frames.
You simply adjust the height of the
bit accordingly in the router table
to cut the profile cut (with bit
lowered in the table) and the cope
cut (with bit raised in the table). |
|
|
|
D |
B |
d |
L |
Part # |
|
2 |
1 9/32 |
1/2 |
4 3/32 |
55460 |
|
2 |
1 9/32 |
1/2 |
4 3/32 |
55462 |
|
2 |
1 9/32 |
1/2 |
4 3/32 |
55464 |
|
|
|
