Crosscutting Blades

Freud® LU80 Precision Crosscut Blades

Freud® LU85 Industrial Ultimate Cut-Off Blades

Freud® LU74 Industrial Thin Kerf Ultimate Cut-Off Blades

Freud® LU88 Industrial Thin Kerf Fine Finish Crosscut Blades

Freud® LU73 Industrial Cabinetmakers Crosscut Blades

FS Tool L06 Fine Cross Cut Saw Blade

FS Tool L10 Fine Cross Cut Saw Blade

FS Tool L05 Thin Kerf Saw Blades

FS Tool L15 Thin Rim Saw Blades

The LU80 saw blade provides flawless, chipfree edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced technology, Freud developed this line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. The combination of High ATB tooth design and anti-vibration slots makes these blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for stabilizer or a scoring blade!

This superior blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. With a finish this perfect you won’t need stabilizers!

LU74 Industrial Thin Kerf Ultimate

Cut-Off Blades

This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud’s unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

LU88 Industrial Thin Kerf Fine Finish Crosscut Blades

This Perma-SHIELD™ coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

LU73 Industrial Cabinetmakers Crosscut Blades

This heavy-duty crosscut blade is designed primarily for heavy use in a cabinetmaker’s shop. Combining a 10° hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut and long cutting life in hardwood, softwood, plywood, and chipboard. The LU73M series is ideal for cutting a wide variety of materials most commonly used by cabinet makers in thicknesses from 1/2" to 2- 3/4" thick.

L06 Fine Cross Cut Saw Blade

• Tooth configuration: ATB
• Cutting material: TC
• Expansion slots: Cu plugged

A P P L I C AT I O N :

• For fine cut-off and trimming of soft and hardwoods, plywood, wood
  veneered and plastic laminated panel materials
• On table saws, sliding table saws and cut-off saws