Phone # 1- 800-678-3313 Fax: 1-616-241-1506 Store & Phone Hours: M-F, 8 - 4:30 EST Established 1969

We Accept:

Non-Ferrous Blades

Freud® LU90 Industrial Thin Stock Non-Ferrous Blades

Freud® Industrial Thick Stock Non-Ferrous Blades

Freud® Industrial Thin Kerf Non-Ferrous Blades

FS Tool L1A Non-Ferrous Metals Blades

FS Tool L1C Non-Ferrous Metals Blades

FS Tool L1B Non-Ferrous Metals Blades

LU90 Industrial Thin Stock Non-Ferrous Metals Blades

Freud Industrial Saw Blades.

This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

						I.C.E.
Ø	Teeth	Kerf	Plate	Bore	Hook	Part #
10"	100 TCG	0.110	0.087	5/8"	5°	LU90M010
12"	120 TCG	0.118	0.098	1"	5°	LU90M012

LU89 Industrial Thick Stock Non-Ferrous Metals Blades

Freud Industrial Saw Blades.

This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

						I.C.E.
Ø	Teeth	Kerf	Plate	Bore	Hook	Part #
10"	72 TCG	0.122	0.098	5/8"	-7°	LU89M010
12"	86 TCG	0.122	0.098	1"	-7°	LU89M012
14"	100 TCG	0.142	0.118	1"	-7°	LU89M014
15"	108 TCG	0.142	0.118	1"	-7°	LU89M015
16"	114 TCG	0.142	0.118	1"	-7°	LU89M016

LU77 Industrial Thin Kerf Non-Ferrous Metals Blades

Freud Industrial Saw Blades.

This thin kerf heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

						I.C.E.
Ø	Teeth	Kerf	Plate	Bore	Hook	Part #
10"	80 TCG	0.091	0.071	5/8"	-5°	LU77M010
12"	96 TCG	0.091	0.071	1"	-5°	LU77M012
15"	120 TCG	0.098	0.079	1"	-5°	LU77M015

L1A Non-Ferrous Metals Saw Blades

FS Tool Industrial Saw Blades.

D E S I G N :

Tooth configuration: TCG
Cutting material: TC
Expansion slots: Cu plugged

A P P L I C A T I O N :

For splitting and mitre jointing non-ferrous extrusions, sheets and light bars
On mitre joint, splitting, trimming, double cross-cutting and sizing machines
Material to be cut must be clamped firmly
Use of spray lubrication recommended

						Standard
Ø	Teeth	Kerf	Plate	Bore	Hook	Part #
7"	44	0.112	0.087	5/8"	2°Neg	L1A180
8"	48	0.112	0.087	5/8"	2°Neg	L1A200
9"	60	0.112	0.087	5/8"	2°Neg	L1A225
10"	60	0.112	0.087	5/8"	2°Neg	L1A250
10"	60	0.126	0.102	5/8"	2°Neg	L1A252
12"	80	0.124	0.11	5/8"	2°Neg	L1A308
12"	80	0.122	0.095	1"	2°Neg	L1A300
14"	90	0.145	0.118	1"	2°Neg	L1A350
16"	100	0.145	0.118	1"	2°Neg	L1A400
18"	100	0.174	0.134	1"	2°Neg	L1A450
20"	100	0.174	0.134	1"	2°Neg	L1A500

L1C Non-Ferrous Metals Saw Blades

FS Tool Industrial Saw Blades.

D E S I G N :

Tooth configuration: TCGM
Cutting material: TC
Expansion slots: Cu plugged

A P P L I C A T I O N :

For splitting and mitre jointing thin non-ferrous extrusions, thin sheets and light non-ferrous bars
On mitre joint, splitting, trimming, double cross-cutting and sizing machines
Material to be cut must be clamped firmly
Use of spray lubrication recommended

						Standard
Ø	Teeth	Kerf	Plate	Bore	Hook	Part #
10"	72